Altex No.5 PLUS Antifouling Light Grey - 4L

No.5 PLUS is the solution to the ever-increasing fouling burden in nutrient-rich waters. 

Designed for the pleasure marine sector, to provide owners with a dependable, high-performance coating system that will save them money in maintenance costs.

It is recommended for yachts, launches, tenders, dinghies and trailer yachts,

Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs.

• Built and engineered on our proven performer No.5 Antifouling
• Highest biocide loading for ultimate protection
• Superior resistance to fouling in static conditions
• Ultimate protection for cruisers in the South Pacific
• High-performance self-polishing ablative technology

  * Durability will be determined by film thickness applied, frequency of use, water conditions, tidal flow, and many other variables

Features Recommended Uses

• Incorporates a powerful biocide package based on Altex proven binder system
• Ablative, multi-season technology provides a continuous supply of fresh biocides
• Complies with IMO requirements
• Excellent low-activity performance
• Can be used for high-speed crafts, however, ablation rate will increase at frequent and regular high speeds
• Performance of up to two seasons

AY&B No.5 PLUS Antifouling is:

• Compatible over most copper-based antifoulings, where recommended preparation is achieved – Please refer to Altex Technical Department for further information
• Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs
• Suitable and recommended for use on primed GRP, gel coat, steel, timber and ferro-cement craft

Specifications

• Generic Type: Ablative matrix
• Colour: Grey
• Availability: Australia only
• Size: 4 Litres
• Finish: Flat
• Thinner: Not normally required
• Clean-Up: Altex Thinning Solvent #12
• Application: Spray, roller or brush
• VOC: 377 – 394 g/L
• Volume Solids: 52%
• Dry Film Thickness: 75 – 100μm
• Usual No. of Coats: 2