FixTech Fix 190HT Black 290ml

Fix190HT is a high quality single component joint adhesive/sealant based on MS Polymer.

It is chemically neutral and fully elastic.

For use in low movement joints and for structural bonding in construction, automotive, marine and aerospace areas where a tough flexible rubber is required.

Characteristics

• Outstanding bond strength on nearly all surfaces.
• Excellent adhesion on porous and non-porous substrates.
• High-performance mechanical properties.
• Flexible elastic rubber – movement accommodation up to ±20%
• The straight forward application even in adverse conditions
• No bubble formation within sealant (in high temperature and humidity applications).
• Very easy to tool and finish.
• Good extrudability even at low temperatures.
• Colour stable and UV resistant.
• Ecological advantages – free of isocyanates, solvents, halogens and acids.
• Minimal health and safety considerations.
• Can be painted with all water-based paints and many other systems.

Applications

• Structural bonding which requires elasticity and high-end strength.
• Structural bonding in vibrating constructions.
• Ideal for all marine applications including glazing.
• Joints in swimming pool areas and humid surroundings.
• Elastic bonding of panels made from HPL or fibre cement.
• Supple bonding in car bodies, caravans and containers.
• Ship deck caulking, ship and boat building.

Technical Characteristics

• Base: MS Polymer
• Consistency: Stable Paste
• Skin Formation* Ca. 12 min. (20°C/65% R.V)
• Curing Rate* 2-3mm/24h (20C/65% R.V)
• Hardness: 38±5 Shore A
• Specific Gravity: 1,40g/ml
• Maximum Deformation: ±20%
• Temperature Resistance (fully cured) -40°C until +90°C
• Elasticity Modulus 100% 0.75N/mm²  (DIN 53504)
• Tear Strength: >3,0N/mm²  (DIN 53504)
• Elastical Recovery: >75%
• Elongation: at break: 800% (DIN53504)

* These values may vary depending on environmental factors such as temperature, moisture, and types of substrates