FUSION® Apollo™ Marine Zone Amplifier

Cat.No:
69607
Sup. No.
010-02569-00
- +
Add to Wish List

IT’S THE DIFFERENCE BETWEEN HEARING THE MUSIC AND FEELING IT

The efficient, easy-to-install amplifier works with your compatible Fusion stereo system1 and lets you choose from monoblock, multichannel, and zone amplifier options.

Features

  • Keep the music going for longer without draining your battery as quickly.
  • No more manual adjustments to your audio settings. The Easy Tune feature does it for you2.
  • A glance at the LED indicators lets you identify if the amplifiers have a short or if they’re overheating.
  • These amps have less distortion and noise, so you enjoy quality audio.
  • Mounting brackets are included for simple installation.
  • Don’t worry about potential overheating damage with our ignition protection design.

POWER AND EFFICIENCY

The Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650-watt RMS and the 4/6/8 channel amplifiers produce 150-watt RMS per channel.

EASY TUNE FEATURE

These amplifiers use the Easy Tune feature2, which automatically regulates audio settings. So, you can get the best quality sound without making manual adjustments.

LESS DISTORTION

Some amplifiers distort audio when they add power. Ours are specifically designed with minimal distortion and noise, so you can enjoy high-quality audio, even at higher volumes.

LED INDICATORS

Identify electrical issues at a glance. These indicator lights will show you issues with electrical currents and shorts as well as temperature.

MOUNTING BRACKETS

Easily install the amplifiers on board with the included mounting brackets.

IGNITION PROTECTED

The ignition protected design helps prevent potential damage from overheating.

CONFORMAL-COATED PCBS

The amplifier’s circuit board has been specially coated to provide extra protection from the marine elements.

2 OHM STABLE

You can connect up to two speakers per channel, increasing setup options.

FUSION TRUE-MARINE™ DESIGN

The amplifiers are designed to last season after season. They have been tested to a high level of protection against salt fog, temperature, vibration and UV.

2000-WATT MONOBLOCK AMPLIFIER

Add extra power to your system with this 2000-watt (650-watt RMS) monoblock amplifier that’s specifically designed to power a subwoofer.

1200-WATT 4 CHANNEL AMPLIFIER

This 4 channel amplifier with 150-watt RMS per channel can power up to four pairs of speakers or two pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.

1800-WATT 6 CHANNEL AMPLIFIER

This 6 channel amplifier with 150-watt RMS per channel can power up to six pairs of speakers or four pairs of speakers and one subwoofer. It includes high-power mode adapters for simple bridging to increase power.

2400-WATT 8 CHANNEL AMPLIFIER

This 8 channel amplifier with 150-watt RMS per channel can power up to eight pairs of speakers or four pairs of speakers and two subwoofers. It includes high-power mode adapters for simple bridging to increase power.

140-WATT ZONE AMPLIFIER

The compact zone amplifier provides audio zone expansion for high-quality sound in more areas on your boat. It’s compatible with 12- and 24-volt electrical systems.

 

1Amplifiers are designed exclusively for use with Fusion DSP-enabled stereos (Apollo RA770, Apollo RA670, Apollo WB670, and RA210) and Fusion speakers.
2Requires setup using the Fusion-Link app on a compatible smartphone.

Specifications
Specification

Overview

  • Physical dimensions without bracket (LxWxH) Zone: 3.94″ x 3.94″ x 1.57″ (100 x 100 x 40 mm)
  • Physical dimensions with bracket (LxWxH) Zone: 3.94″ x 4.53″ x 1.89″ (100 x 115 x 48 mm)
  • Weight: Zone: 1.01 lb (460 g)
  • Water rating: Zone: IPX7
  • Amplifier class:  Class-D
  • CEA-2006 power rating: Zone: 20 watt RMS x 2 @ 14.4 V input - 4 ohm < 1% THD
  • Total rated power output - 2 Ohm (Watts) Zone: 30 watt RMS x 2 @ 14.4 V input - 2 ohm < 1% THD
  • Peak power (watts) Zone: 140 watts
  • Input sensitivity: Monoblock: 2.15 V RMS
  • Input impedance: Zone: 9k Ohm
  • Operating voltage: Zone Amplifier: 10.8 V - 32 V DC
  • Current consumption (StandBy) Zone: < 1 mA @ 14.4 V input
  • Current consumption (Idle) Zone: < 0.04 A @ 14.4 V input
  • Current consumption (Max) Zone: 10 A
  • Fuse rating: Zone: 16 A electronic fuse (no replacement necessary)
  • Ignition Safety Protected (SAE J1171) Yes
  • Protection circuits: Reverse voltage / Input under/over voltage / Over Temperature / Output short circuit
  • Operating temperature range: 0° to 50° C
  • Warranty: 3 years

In The Box

  • One Apollo zone amplifier
  • One mounting bracket
  • Three 6-gauge, self-tapping screws
  • Wiring loom
  • Installation instructions
  • Important safety and product information (ISPI)

 

SHIPPING DELAYS EXPECTED TO WESTERN AUSTRALIA

The Sydney-to-Perth rail link is currently closed due to heavy rain and flooding. The Melbourne-to-Adelaide rail link is also closed due to damage caused by a train derailment.

This situation is causing extended delays of deliveries to Western Australia for the following shipping services:

- Australia Post eParcel - Regular
- TNT Road

If you need an order in Western Australia urgently, consider using  the "Australia Post eParcel - Express" service if it is available for your order. Alternatively contact our WA MAIL ORDER DEPARTMENT to discuss options based on stock already available in WA.

CHRISTMAS ORDERS

Australia Post and our Commercial Couriers are expecting the festive season to be extra busy this year. Based on their advice, we cannot guarantee orders placed after the cut-off dates listed below will be delivered by Christmas.

To avoid disappointment place your Christmas orders as early as possible.

State Regular Express
ACT 11th Dec 15th Dec
NSW 11th Dec 15th Dec
NT   5th Dec 11th Dec
QLD 11th Dec 15th Dec
SA 11th Dec 15th Dec
TAS 11th Dec 15th Dec
VIC 11th Dec 15th Dec
WA   1st Dec 11th Dec

 

Overseas, offshore islands and distant mainland locations may take up to 3 or 4 weeks to deliver. Please contact your local Mail Order Department to discuss specific details relating to your situation.


SHIPPING

All orders are shipped from our Brookvale, Sydney order fulfilment centre. Orders are normally shipped within 5 business days - most quicker!

Shipping day estimates after your order leaves our fulfilment centre in Sydney are based on Australia Post domestic delivery times:

 State   Regular
  Express
 ACT   2 - 3 business days   1 - 2 business days
 NSW   2 - 4 business days   1 - 3 business days
 NT   4 - 13 business days   3 - 5 business days
 QLD   3 -12 business days   2 - 4 business days
 SA   3 - 5 business days   2 - 4 business days
 TAS   4 - 8 business days   2 - 4 business days
 VIC   3 - 5 business days   2 - 3 business days
 WA   5 - 10 business days   2 - 6 business days

Last updated 12/09/2023

* These delivery times are an estimate and actual delivery times may vary based on peak periods and other external factors. Bulky orders may take longer.

Shipping rates are automatically calculated based on live quotes supplied by our shipping partners. The quote takes into consideration, the bulk of your cart, where you want it delivered and if you want express or standard shipping.

Get a shipping rate estimate by adding items to your online cart. Go to the cart by clicking on the shopping cart icon located at the top right of the page. Then enter your shipping destination information into the "Estimate Shipping and Tax" section of the shopping cart summary.

International Shipping

We are currently unable to deliver online orders outside of Australia.

If you are located outside of Australia and wish to place an order offline. Please contact our Mail Order department or send us an enquiry via the orange help bubble located at the bottom right of this page.

 

RETURNS

Online purchases can be returned/exchanged within 30 days. Some exclusions do apply.

Visit our Returns Policy page for details on how you can return an item.