Icom IC-M801E MF/HF SSB Radio Telephone Long Range Communications

Features

• Built-in DSC (Digital Selective Calling) Class E
• Remote control head for easy install
• Australian Type Approved
• DSP (Digital Signal Processing) for improved sound quality
• Easy to use
• LCD with dot-matrix characters
• Water resistant design
• 125W (PEP) of output power (4.725 MHz)

DOWNLOADS:

  Icom IC-M801E Instruction Manual

Physical & Performance

General

• Frequency coverage: Receive: 0.5-29.9999 (continuous) / Transmit:1.6-2.9999, 4.0-49999, 6.0-6.9999, 8.0-8.9999, 12.0-13.9999, 16.0-17.9999, 18.0.19.99999, 22.0-22.9999, 25.0-27.50000 / DSC: 2.1875, 4.2075, 6.3120, 8.4145, 12.5770, 16.8045
• Type of emission: J3E (USB/LSB), J2B (AFSK), F1B (FSK, DSK), A1A (CW), H3E (AM) LSB, A1A, H3E modes are receive only.
• Number of channels: 1205 (max.) (160 programmable channels: 249 ITU SSB duplex: 124 ITU SSB simplex: 662 ITU FSK: 10 Semi/auto channels)
• Antenna impedance: 50Ω (SO-239x2)
• Power supply: 12V version: 10.8V-15.6V DC (floating ground) / 24V version: 21.6V-31.2V DC (floating ground)
• Current drain: Tx Max. power: 60A/30A (12V/24 Version) / Rx Max. audio: Less than 6.0A/3.0A (12V/24 version)
• Operating temp. range: -15°C to +55°C
• Frequency stability: ±10Hz (Approx. 5 min. after battery connection)
• Dimensions (projections not included): Main unit: 367(W)x95(H)x260(D)mm / Controller: 220(W)x110(H)x84.4(D)mm / Speaker: 110(W)x110(H)x84.4(D)mm

Transmitter

• Output power (with AT-141, sold separately) 1.6-3999MHz: 85W PEP / 4.0-27.500MHz: 125W PEP
• Spurious emissions: 43dB below peak output power
• Carrier suppression: 40dB below peak output power
• Unwanted sideband: 55dB below peak output power (With 1kHz AF input: at Max. power)
• Microphone connector: 8-pin connector (2.4kΩ)

Receiver

• Sensitivity (at 20dB SINAD: emf)
• Spurious response rejection: 0.5-29.9999MHz More than 70dB / DSC More than70dB (except 1/2 2nd IF image)
• Audio output power (at 12/24V DC): 4.0W typical at 10% distortion with a 4Ω load
• Clarity variable range: ±150Hz
• Headphones connector: 3-conductor 3.5 (d) mm (1/8")
• Speaker connector: 2-conductor 3.5 (d) mm (1/8") /4Ω

Supplied accessories

• Separation cable, OPC-1466
• GPS plugs
• Mounting bracket
• DC power cables
• Handset, HS-98
• Spare fuses
• External speaker

Weight

• Controller (RC-25E): 570g
• Main unit: 8.5kg
• Speaker (SP-24E):370g

Optional Extras

• Automatic Antenna Tuner AT141 (sold separately)
• Heavy Duty stainless steel Mounting Bracket with quick release (MB108)