Norglass Weatherfast Premium Timber Oil 1Lt

A modified synthetic resin coating for feeding the timber where a natural grain appearance is desired. Contains U/V inhibitors for additional protection. 

Fast drying and does not leave a greasy film. Excellent penetration into open grained woods. For use on decks, floors and furniture.

Features

• Modified low odour Synthetic resin
• Contains UV inhibitors
• Fast drying
• Non greasy

Specifications

• Size: 1Lt
• Colour: Light amber
• Finish: Satin
• Coverage: 9-12sq. metres per litre per coat (subject to timber porosity)
• Drying time: Touch dry: 1 hour at 20 degrees C and 50% relative humidity
• Recoating: Multiple coats can be used providing that they are all applied in a wet on wet fashion. Once drying commences further coats will only be deposited on top of the previous layer and thus produce a "varnish like" film. Where this happens, eventual stripping will be required to reinstate the original condition.
• Clean up: Weatherfast Brushing Thinners

Uses: Primary use is for open grained timbers/decks where a temporary "natural" wet look is desired without the cumulative effect of build-up coats being produced which would involve eventual stripping

Application: Use a brush, roller or pad method. Apply liberally to a square metre or two and repeat again and again as absorption becomes apparent.

Move on in this fashion until the surface is adequately coated. Alternatively, apply one liberal coat over an area that takes no more than 20 minutes to cover and then repeat the process again (and again if required).

Allow a minimum of 4 hours to dry before light foot traffic. Overnight drying for normal use.