Ronstan Series 30 Orbit Double Becket Block
Ball Bearing Orbit Blocks™ boast the highest strength-to-weight ratio.
This is achieved through all-composite reinforced polymer materials and multiple attachment options.
Their precision design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fibre-reinforced composites in the block head, cleat arms and beckets.
- Highest working load in its class
- Secure, versatile and secure attachment
- Low profile and compact
- Sheave Dia: 30mm
- Max. Rope: 8mm
- Max. Cable: N/A
- Pin: N/A
- M.W.L. 450kg
- B.L: 900kg
- Weight: 51g
* Becket suits up to 6mm (1/4”) line. For lines above 6mm (1/4”) use an additional Dyneema® link (sold separately).
** Total block load. Load on becket not to exceed 31% of block load. ie. M.W.L 140kg (307lb), B.L. 280kg (614lb). Suitable for 4:1 system at rated block load.
Kilogram for kilogram of working load BB Orbit Blocks™ are the world’s lightest. To gain peak performance, we engineered out the heavy steel load straps, head post, shackle and cleating accessories.
Through extensive research and development, we replaced virtually all metal components with high-tech polymers and fibre equivalents.
Weight and bulk are further reduced in the different block configurations. The ball bearing single and becket block has a through-sheave becket arrangement. The result? The lowest weight possible.
Multi-sheave blocks have only single intermediate cheeks and an ultra-light and efficient head arrangement. Other brands just link together their single blocks with a heavy steel channel across the top of the block, with unnecessary extra cheeks adding extra weight and bulk not found in Ronstan Orbit Blocks™.
Highest working load in its class
The proven Ronstan 2-stage bearing system (Series 30 and larger) features high compression grade Acetal ball bearings and a secondary full-contact bearing. This gives minimum friction across the full working load range.
The sheave and bearing system is supported by a fibre-reinforced load frame, computer modelled and optimized using advanced stress analysis methods. The Dyneema® Link, used in multi-sheave blocks, is produced from high spec SK75 fibre, which is 10 times stronger and lighter than steel, and provides the final connection from the block to the load point.
Simple, versatile and secure attachment
The single block is easily lashed to an attachment point, and can also accept Dyneema® Links and shackles for a variety of efficient attachment alternatives. The Dyneema® Link used in multi-sheave blocks is easily fitted and secured by a removable pin.
The Dyneema® Link can also be removed and replaced by a shackle, custom lashing or strop. These blocks are far more compatible with Dyneema®/Spectra® lines, carbon laminate connection points and webbing than traditional blocks with steel loop tops or shackles.
Low profile and compact
The two way head in the single lashing block allows for alignment at 0° or 90° orientation, while the single swivel block allows for full articulation.
The flexible Dyneema® Link used in multi-sheave blocks provides 0° or 90° orientation. It connects directly to the head of the block rather than to an intermediate head post.
This reduces weight and gives the lowest possible profile while allowing full articulation. Beckets have been carefully designed to minimize height.
- Mainsheet systems and spinnaker sheets on dinghies to 5m (16ft)
- Halyard, vang and backstay applications on boats to 5m (16ft)
- Control line applications on larger yachts
- Sheave: High compression strength carbon black Acetal
- Ball Bearings: High compression strength Acetal
- Frame/Cheeks: Toughened, glass fibre reinforced Nylon
- Link: UV stabilised, multi-strand impregnated SK75 Dyneema®
All orders are shipped from our Brookvale, Sydney order fulfilment centre. Orders are normally shipped within 5 business days - most quicker!
Shipping day estimates after your order leaves our fulfilment centre in Sydney are based on Australia Post domestic delivery times:
|State|| Shipping Days
|ACT||2 - 5 business days|
|NSW||2 - 5 business days|
|NT||7 - 11 business days|
|QLD||3 - 5 business days|
|SA||5 - 6 business days|
|TAS||5 - 7 business days|
|VIC||4 - 6 business days|
|WA||6 - 9 business days|
* These delivery times are an estimate and actual delivery times may vary based on peak periods and other external factors. Bulky orders may take longer.
Shipping rates are automatically calculated based on live quotes supplied by our shipping partners. The quote takes into consideration, the bulk of your cart, where you want it delivered and if you want express or standard shipping.
Get a shipping rate estimate by adding items to your online cart. Go to the cart by clicking on the shopping cart icon located at the top right of the page. Then enter your shipping destination information into the "Estimate Shipping and Tax" section of the shopping cart summary.
We are currently unable to deliver online orders outside of Australia.
If you are located outside of Australia and wish to place an order offline. Please contact our Special Orders Delivery department or send us an enquiry via the orange help bubble located at the bottom right of this page.
Online purchases can be returned/exchanged within 30 days. Some exclusions do apply.
Visit our Returns Policy page for details on how you can return an item.