Rule 12V LoPro Auto Bilge Pump 900GPH

The new Rule LoPro (low profile) bilge pump is small enough to fit into tight spaces in the bilge - yet it packs real pumping power at 900 GPH/3400 LPH.

The pump includes numerous features for ease of installation, ease of use and multiple options for use.

Features

• Up to 900 GPH/3400 LPH - 57 litres per minute at open flow
• Up to 634 GPH/2400 LPH - 40 litres per minute at 1 metre head
• Up to 418 GPH/1582 LPH - 26 litres per minute at 2 metre head
• Maximum head height 4 metres = 0 flow
• Fully submersible
• Horizontal or vertical mounting
• Rotation discharge swivels 180 degrees for ease of installation
• Threaded discharge nozzle with multiple 4 nozzles included (3/4", 1", 1 1/8" all straight and 3/4" 90 degree elbow)
• Straight discharge ports include a nitrile non-return check valve (for use on straight ports only)
• Ignition protected - won't create spark
• Thermal cut-out to prevent overheating if run dry
• Silicone blocked tinned 16 gauge wiring
• High or low water sensing mode
• Electronic automatic timer mode
• Pump test mode
• Manual override 3rd wire - requires SKU 84701
• Length - 245mm
• 12V 4 amp, use a 7.5 amp fuse
• 12V DC only - Do NOT run direct off a 240V-12V transformer
• 3 year limited warranty

Specifications

• Voltage: 12VDC
• Flow: 900GPH open flow at 13.6V
• Amp Draw: 4A approx
• Protection: TCO
• Port Configuration: 3/4”, 1”, 1-1/8” Straight, 90 degree 3/4”
• Backflow preventer valve can be used with straight fittings
• Height: 2.3”
• Length: 9.3”
• Width: as little as 2.3”

High or low water sensing mode - the pump can be set to start operation at either 33mm or 50mm bilge water height

Electronic automatic timer mode - the pump can be set to automatically check for water very 2.5 minutes - if water is present it will continue to run and pump bilge water. This feature does run down the battery so it is not recommended to leave the boat unattended for long periods of time while this feature is in operation.